Veritas 8 compact alarm will not set?

Way to go lads.
SDS go pester somewhere else FFS your usless.

Alarm
December 2011

acorn,you know what sd stands stands for ,stupid dope,so why waste your time trying to educate it ?:-)

gts
December 2011

Please SD stop trying to answer questions on things about which you know nothing.

acorn
December 2011

SD, please, it's a TAMPER fault (beeps 9 times), that is what the Veritas 8 does when it has a TAMPER fault.

That information has been given and that's the fault.
9 BEEPS = Tamper fault.

As it is a universal tamper loop with this panel, there will be no circuit indication that goes with it, get the idea?

There will be a pair of wires connected into the terminals marked as TAMP, that is where the problem is likely to be, where ever these wires go.

Could also, possibly, be the SINGLE wire that goes into Term 'C', that is the bell box A/T return, a neg voltage of abt 13v DC but I would have expected the 'bell' to have sounded also

acorn
December 2011

Look to what is alarmed, what does the unit tell you, which sensor is active, streatching the tamper spring will only help if tamper fault. Check the unit that is alarmed, Have you fully reset after the alarm, where you opened the box.

SD
December 2011