So how does one get the inner door liner off to replace the handle?

Chances are the panels separate as shown in the photo here http://207.234.249.73/mwd/door_panels.jpg

This can usually be done without removing the door from the microwave.

In cases where it is felt that door removal is necessary, I recommend detaching the door from the hinges.

I generally do not advise removing the hinges from the microwave.

Whenever the hinges are removed, great care must be taken to put them back in the very same position they were in.

Failure to do so can cause microwave leakage, which can cause risk of skin burns, fire, and disruption nearby electronic devices.

In my professional opinion, no one should work on a microwave unless they are fully informed and aware of the deadly hazards and necessary precautions.

You can find this information and in our safety and disassembly text files at http://www.microwavedisplay.com

You can find safety and disassembly text files (as well as a text file which helps in diagnosing and repairing door switch problems) at http://www.microwavedisplay.com

You can find handy exploded views, wiring diagrams and parts lists and also order parts for most other brands from the Pros here: http://tinyurl.com/gv383.

William E Miller † MicrowaveDisplay.com
March 2007

The trim usually just snaps in place. Take a small flat screwdriver and carefully pry out one corner. you can then slowly pull the trim outfrom around the door. afterwards just snap it back in

Philtech Electronics
November 2006