Hi there I have a Simpson EZI 605
6.0 kg washing machine!
Every time I go to wash wether it be
On high or low water level it decide to
Over fill (water won't stop)
Just wondering what it may be?
1 of 3 things. Either inlet water valve is not shutting off. Check by starting the fill process & then open the lid or press pause. Water flowing in should stop without any hesitation. Try it several times. If water shuts off then valve is good. If it doesn't then replace the valve. Second thing is the air pressure tube may have a hole or split in it. Take back panel off machine & locate rubber tube on right hand side going from the bowl up to the top panel. Check as far as you can for any holes or splits. If found replace the tubing. Lastly it could be a faulty level sensor but that is part of the main control board and can't be replaced on it's own.
Lincoln Appliance NZ
May 2014
?
Brad
May 2014
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
