How do I set the timing on my 1999 Ford Transit 2.5 Diesel?

The tming is set with three timig pegs or drill bits will do the job
1 crank shaft location is in the engine casing below the fuel filter at the back of the engine the peg goes through the casing and locates in the fly wheel approx 10mm peg

2 fuel pump align the cut out in the pulley with the drilled hole at the top of the pump approx 7mm peg

3 camshaft align the hole in the pulley with the hole in the engine front plate approx 7 mm peg

TONY ...FORD TECHNICIAN
January 2005