How to change the clutch on Dyson DC03?

It is a lot better if the floor wheel is first removed before taking out the clutch surround. If not, the clutch surround is likely to break.

NavHen
April 2018

Siund advice .Job done . Many thanks. Richard

Richard Hughes
December 2007

try checking the belts.

Remove the soleplate, brushbar and the housing surrounding the clutch, there are THREE screws 2 holding the clutch in and one that can be accessed by moving the brushbar housing so its inline with the main upright body, you will also need remove the rubber piping that runs through the small channel and the clutch surround will pull out, then you can see the motor spindle the motor belt is slimmer then the clutch to brushbar belt, if the belts have gone then you will also need to either replace the clutch or strip the clutch to gain access to the belt.

Look up the clutch removal and stripping on google

Dyson Mania
April 2007