Depending on the build it will require either the front or back panel taking off to get a new belt around the drum and then the mtor pulley.
If the back is fastened by screws it would prob be the way as motor is usually at left rear.
Not easy with condensers as due to the condensation around screws and bolts tend to rust or stick in. Best of luck
BG
October 2007
I DO NOT HAVE AN ANSWER. I NEED THE ANSWER FROM YOU
Avril Deeks
October 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
