Proline TDC7A?

at the back in the water trap where the small water pump is the drain hole from the conenser gets blocked this needs cleaning mine now works fine

mick
November 2010

i have put new thermostats in my proline tumble dryer modle tdc7a but they keep tripping the fuse box

brian
July 2010

The water isn't draining into the tank, have cleaned all filters and tried to look for blockages but can't work out where it could be? Is there anywhere that I can find an exploded diagram for this model or any sugestions on how to fix it?

Desperate dryer
October 2009

Hi Duncan

It may seem simple, but there are one or 2 things you can check before going nuts!

First check the lint trap is clean, this is inside the door on the bottom and pulls up and out, you will be amazed how dirty this gets, secondly check the condenser, pull down the bottom flap under the door and on the left is the condenser, undo the 3 tags and slide it out, give it a good wash under the tap, again it will be full of lint! Lastly have you checked the heat setting button on the front? If it is pushed in you are on half heat, easy to do, I've done it myself.

It would seem unlikely it is anything more major, if the thermal cutout has operated then it will not work at all and if the heater element is broken, it would also not warm at all.

Hope this helps.

Richard
January 2008