How to mend Husqvarna

2

husqvarna 350 chainsaw?

my saw is getting spark and fuel but won,t start it is wetting the plug and barrel alot

1

How do i adjust my carb on husq 36?

if i am running lean, there is a h and l under the two adjustment holes. what tool do i need and what do the t... [Read more]

2

my husqvarna 36 will not stay running w/o choke on?

as long as the choke is on it will idle. as soon as i pull the gas trigger the choke automatically cuts off an... [Read more]

1

How can i adjust my carb?

to set the carb on a 435 husqvarna chainsaw, do I need a special wrench or screw driver?

1

husqvarna 136 cuts out when warm/ hot?

husqvarna 136 chain saw cuts out and will not start until it cools down,i have changed the sparkplug and clean... [Read more]

1

wont start?

350 husqu. has spark ,fresh fuel reaches plug.how do I recheck & set timing. or your suggestion why wont start... [Read more]

2

How do I adjust the carb. on my Husqvarna 55 chainsaw?

I've managed to mess up the high and low settings on my Husqvarna 55 chainsaw. How do I reset them, so it will... [Read more]

1

how can i fix husqvarna 51 chainsaw?

silencer on husqvarna 51 chainsaw fallen off because the anchor points on cooling fins broken off. how do i fi... [Read more]

1

Husqvarna chain saw clutch springs 350 model how do I re-install them?

chain saw clutch springs 350 model how do I re-install them

7

husqvarna chainsaw 142, wont tickover?

142 has been a poor starter, I changed petrol and oil 2 tmix, and set spark plug gap to 20 thou. Got it to st... [Read more]

1

husqvarna chainsaw 235e?

how do i get chain brake off and cover back on?

1

chain saw not running right---bogging down?

I have a Husqvarna Chain Saw 345 that is not running right---seems to not have enough power. When you cut in ... [Read more]

4

how can i fix my husqvarna 235 chainsaw?

when bar oil tank is full of oil it does not oil the chain at all

1

husqvarna 55 rancher ?

what is epa mean on my saw. my saw will not run wright. its not got much power, on the h and l jets to ajust, ... [Read more]

2

Husqvarna 266XP has no fire?

how do I check mag and ignition module, what is the air gap? I do have continuity through switch through mag b... [Read more]

1

resetting the chain brake?

I need to reset the chain brake on my Husky 455 Rancher. Are special tools needed and if so what are they?

2

Husqvarna 350 cutting at an angle?

My husqvarna 350 cuts at an angle and is wearing the chain bar on one side only.

2

husqvarna 55?

How do you change a grooved pin in the oil system on a 55.

1

Husqvarna 455 Leaks Oil when not running?

After using my saw, chain oil leaks all over the place for a period of days. Is this a common problem, and can... [Read more]

1

My 395xp will not start, used once?

My 395 has been used once and now will not start. What can be wrong it is only 1 month old