Mend > Vacuum Cleaners

Mend Household Appliances, Vacuum Cleaners

dirt devil ultra vision turbo?

my vaccums beater bar won't turn and the motor is smoking. It looks like the black band on the beater bar is kind of melting and chipping away from the belt turning. I put on a new belt and cleaned the whole machine and let it cool down but the problem is still there. Could the motor be burning out?? It is almost 4-5 years old. Thanks Linda

linda
January 2011

Dirt Devil Household Appliances, Vacuum Cleaners Dirt Vision Turbo

remove the bottom plate to expose the brush & belt remove the brush out along with the end caps, now try to turn the caps on the brush spindle (probably stiff/solid) so pull off the cap clean off all the debris from around the shaft refit the cap, repeat this procedure on the opposite end this should a 100 % improvement on the brush now turning FREELY, refit the brush bar and the belt to machine

post a reply if this helps fix

wirecutterman
January 2011

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Dirt Vision Turbo

Click here to mend Dirt Devil vacuum cleaners

can a brush roller be repaired?

Upright bagless dirt devil will run but will not pickup dirt from carpet?

Why is my dirt devil so hard to push forward?

access plate for dirt cevil belt?

how do I replace a belt on a dirt devil vision wide glide vacuum?

How I can fix my Dirt Devil 1400W Cylinder Vacuum Cleaner?