Recent: Throttle issue?

Mend Worcester Convector Heaters

Mend Heating, Convector Heaters
Find out how to mend it for free.

Ask Question
Mend Heating, Convector Heaters
Click here to mend Worcester convector heaters

Mend > Convector Heaters

Mend Heating, Convector Heaters

high pressurs?

i have high pressure on my 24i worcester bosch boiler when i drain it it gos back up and stops at 3.5 bar and just over flows thanks

mark ramsey
December 2011
It will not go over 3.5, as the over pressure valve has opened, You say you have drained it, you must still have the filling loop open, only way it can keep filling by itself, or filling loop valve faulty. If it is you need to turn stop cock for water flow off. before more damage occures, you may find when it is sorted, that the over pressure valve will not seal fully, and you will continue to loose pressure via it, so it then need to be replaced.

SD
December 2011

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for 24i Boiler Stops

Mend Heating, Convector Heaters
Click here to mend Worcester convector heaters

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Convector Heaters
Click here to mend Worcester convector heaters