my Gainsborough 9.5 deluxe shower has lost pressure?
after using incorrect shower head, the safety device on outlet pipe blew out. New outlet pipe fitted and original shower head, initially all looked OK. However, quickly seems to have lost pressure, Any ideas?
My shower has lost all pressure got new unit still the same
S Briggs
May 2012
Thanks for the advice. Saved us shedding out on a new unit! PHEW.
Torquay Thankfull
September 2011
many thanks!
good tip
david of ringwood
June 2010
That's brill Thanks worked at treat :-)
Rachel Tighe
January 2010
hi...all you have to do to reset the pressure value on the back of the outlet (water coming out against the wall ?) is push the nylon ball back into place using a small/medium sized allan key. push hard enough and the ball should click back into place. test to see if water stopped from pressure outlet..if not try to push in a little harder. mine is a 10.5 deluxe...done twice over 2 years ..no probs...
walesviking
January 2008
I can answer this question...
my Gainsborough 9.5 deluxe shower has lost pressure?