I sent away my timer unit for repair and got a different one in return so I now don't know which way round to connect the wires to the 2 spade terminals as I had marked up the old pcb. There are 2 white wires on one terminal and a brown one on the other. They are fitted through a hole in the white plastic pcb cover. I need to know which way they go with the LEDs at the top. There is nothing printed on the pcb to indicate polarity and they connect to a relay.
Hi Lee, did you have any luck finding a new PCB as I need one for my diplomat ADP8242...
Thanks!
Nige
October 2008
Hi i have just taken my friends one appart and there board is burnt badly on the back of the board.
looking down on the the board from in front of the door with the board in place the brown wire goes to the right terminal.
could you please advise me where i can get a spare board and how much, mr.lslewis@ntlworld.com
lee lewis
April 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
