the alarm went oof three times in the night, i assumed the pet PIR fitted was not working and so took it off and now the keypad wont respond to anything at all, i have replaced all the fuses in case one blew. Is there a reset code needed?
Lewis, sounds like you opened the tamper circuit when you removed the pir, refit it taking care not to touch the wire ends together.
(or you will blow a fuse in the panel) If it alarms again look to see which lights are on when you stop the alarm going off.
Rob
Rob
February 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
