I need to replace the water inlet valve on a Beco WM1512S Washing Machine. To get to the valve I need to remove the back, but it's in two parts and the upper part doesn't appear to come off! Is it all one with the sides, and do they have to be removed too? All help appreciated.
torx screws not on this model check out www.asuds-appliance-spares .com for all your to info
a u
March 2008
Check out www.2ndwave.co.uk/manual.html
Theres a drawing there of a beko cover removal. Top held on with torx screws - you need a torx screwdriver bit to remove them. Top slides off towards rear. Screws on side panels are hidden behind rubber stoppers at the base of each side. prise off stoppers and remove screws. unclip valve holder, casing splits in half vertically.
dan
February 2008
take screws out of top lid (at the back).now push the top lid from the front backwards (hard).now you can see valves at back left corner