replace belt on dryer?

Take off the lid and right panel, remove guard from back. Remove the 3 screws from the pushing and release the drum. put belt around drum, load spring on tensioner, run belt around drive wheel and tensioner. Load the tensioner to re-center spindle on drum in bushing. Replace 3 screws in bushing and circlip. Reconnect wires reattach panels. Bob is your mothers brother

J
January 2007

That's a mean job!

Start by taking the side panel off. If you can't see what to do from there, call an engineer.

www.washwise.co.uk
June 2005