500w pir floodlight sensor not working?

changed the bulb can hear the sensor click but no light
did notice a crack in sensor
should i replace sensor?

Bryn
October 2013

dec 2009
I had the same daylight testing problem as above, but at night it seems to be working anyway. Weird!?

Andy
December 2009

I have the same problem but with the homebase 150w pir. I took the first one back and got a new one. It still wont work in daylight mode. The idea is with the photo electric cell covered the light thinks its dark and allows you set up the PIR. you then take of the photo cover and it goes into auto mode ready for the night time. Guess either they all have a fault or we are missing some instruction. I am going to wait until tonight to see if it works.

Dave D
April 2009

We have had a few PIR floodlights and after a time they dont work do i need to replace them or would i need a replacement sensor.

C. Scott
January 2009

when you initially power up a pir floodlight it will illuminate for a length of time then go out-this proves the light fitting.
i guess the "sensor" you mentioned is the pir?
confused over pir and photocell cos photocell when covered would simulate darkness and light would turn on,pir would not turn light on as it would already be lit.
is there an option to use either photocell or pir.
check setup section of instructions.
would be helpful to see controls and options.
wiring may be correct.

dave
March 2008