how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?
No spark, want to pull flywheel, but not sure what else to remove before using puller. Have top cover/shroud/recoil off, but then what do I remove? Must be a nut or something holding the flywheel on.
there is a large nut & dished washer that needs to be removed first then install puller and tighten do not forget to lubricate (grease) where puller contacts shaft end a slight tap on puller bolt will help but do not use brute force this will work every time
jonathan waters
March 2008
Need to take thr recoil bearing housing off .....big pair of pliers or pipe wrench .....counter clock wise then pry it off carefully and there you are ..before tryin to pry it off spray some wd 40 or pb blaster on shaft .....
bg
March 2008
I can answer this question...
how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?