How does one remove the ends from the hose to replace the hose? I can see the grooves, the hooks, but I can't figure out how to take it apart. I suspect it twists and then pulls apart but I can't get it to twist. Any ideas would be helpful.
I just finished replacing the hose on a Kenmore Progressive canister vacuum. I used a pair of channel lock pliers and squeezed the connection pipe in the handle (not the jaws of the pliers). Position the handle at the top and bottom of the pipe and squeeze. This will cause the outer sleeve to flex and bow out at the sides. I was able to release the snaps by working on one side than the other. When re-assembling, just make sure everythin is lined up and snap it back together.
Rick Angiel
August 2005
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vacuum cleaners.