machine makes noise as if to start then no water is taken in.led lights go out and machine goes to end of program.if left for a few hours switched off will operate normally but only once .
pressure switch and hydraulic system fault.could be faulty pressure switch or pressure hose or pcb or blockage.you can check for blockages and split/blocked pressure hose but the pressure switch and pcb are more difficult.the other obscure fault on these which gives this fault is a heating element with a low impedance to earth (>10meg).you will need a megger to check this
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.