My hotpoint wma64 will not drain water out. The water is coming in and the washer is getting full. The door would'nt open so i tried a wash cycle again with no luck.
if your drum is turning i guess its your waterpump, turn machine on its side, make sure you get the water out and unplug washer. locate your pump its at the end of your outlet hose, a few screws and a clamp and a wire, remove and fish out the blockage proberly a coin
simply fit pump back on and bobs your uncle, good luck
cockney gazza
May 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
