All green/yellows together and to green/yellowof light
All reds together
this bit will be a bit of trial and error unless one of the blacks has a red bit of tape on
2 blacks together and to black or blue of light
1 black (with red tape) to red or brown of light.
you may trip the circuit breaker or blow the fuse whilst you work the last part out.
If in doubt call an electrician in
Mr Handy Andy
May 2008
All the green/yellows are earth. Two of the reds are the loop in and out phase lives. Two of the Blacks are phase neutral loop in and out. One of the reds goes to your wall switch and one of the blacks is the switched live back from the switch and should have a sleeve.
Connect earth from your light fitting to the earths. Connect the Neutral to the neutrals. Connect the live to the switched live.
If you do not understand any part of this, get an electrician before you kill some one or burn your house down.