qualcast trojan 16 won't start?

same trouble clean out carb buy a new plug which is recermended runs well or poor small amount in to plug hole thats petrol

mr m
April 2011

ensure there is not to much oil in it. This will just oil the plug up and it will not start.

Brent
August 2009

Drain the fuel. Undo the brass bolt under the small reservoir that feeds the carb. Some petrol will leak out - catch this is in a suitable container or rag. Remove the canister & bolt (remember which way round in goes. Chances are the small holes in it will be blocked - clear these by blowing through it. Check the float works. Re-assemble. Add a small amount of fuel & check for leaks. See if it starts.

Mick
April 2009

I had/have this problem. My one turned out to be a case of the cable being streched which in turn meant not enough "choke" when cold. My get around is to push the accelerator forward where the cable links and this gets it working.

However the reason I,ve seen your problem is that I need to replace the cable, because its a bit of a chore !!!!

Dave G
June 2008