Blaupunkt radio code request?

Please note that when I press any buttons on the my radio 1-6 the display immediately prompts to the next character. In othwerwords it doesnt give me the opportunity to press any one button more than once. Therefore if I try to press the first button six times in accordance with your suggested 6027 code the display will show 1111. Any ideas?

Chris
July 2008

repeat your question + what the problem is and email me via

http://tinyurl.com/4ydhop

RegWorts
June 2008

Reg, Ive tried your suggestion but can not get it to shift from the radio locked position. I left the key in the ignition until the displayed showed a key with 4 dashes to put the pin no, but the ^ or 6 keys does not seem to work as the preset button. Is there anything else i could try?

Chris
June 2008

(re) Visit the webpage (again?) below and follow the demonstration on METHOD 1

http://www.davidsonelectronics.co.uk/code_entry.htm

Instructions

Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " ?? " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " ?? " Until the Unit Beeps

note Preset (??) is button ^ , 6 or AS ( depending on your radio model)

RegWorts
June 2008

Thanks for your reply but ive just gone to try the code but ive only got buttons 1-6?

Chris
June 2008

Try 6027

Entry info here

http://www.davidsonelectronics.co.uk/code_entry.htm

RegWorts
June 2008