Recent: Replace rear right door upper right latch cable - high roof?

Mend Potterton Home Heating Systems

Mend Heating, Home Heating Systems
Find out how to mend it for free.

Ask Question
Mend Heating, Home Heating Systems
Free repair help for Potterton home heating systems

Mend > Home Heating Systems

Mend Heating, Home Heating Systems

Potterton Powermax 80i- lockout?

i have a powermax 80i which goes into lockout with an error E01. Looked in the manual and cannot find the E01 error listed... the gauge under the boiler is set at 1.5 bar and if the boiler is reset the digital display indicates p2.0 which shoots upto 3 and then lock out again...

paul
July 2008
I have now drained down the system and refilled it to 1.5 bar and the same error is occuring.

Paul
August 2008
E01 is central heating pressure too high, p2 rising to 3 suggests pressure building up and boiler locks out at 3.

manual available as pdf format at http://www.partsarena.com/baxi/

section on diagnostic codes for you to read.

could filler be left open or failed? is pressure guage on 1.5 working?

iain
July 2008
Mend Heating, Home Heating Systems
Free repair help for Potterton home heating systems

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Home Heating Systems
Free repair help for Potterton home heating systems