Mend > Oil Filled Radiators

Flushing unvented CH system?

Have a Worcester Heat Slave combi 18 yrs old and am looking to replace with condensing combi.
Would like to flush my system and replace TRV's and Lockshield valve my self to save some money.
Is it his reasonable? I am good at DIY and have most tools.
I realise that this system is unvented, does this make it harder to do? any explanation welcome. Thanks Martin

Martin King
August 2008

Worcester Heating, Oil Filled Radiators System Heat Combi

Not really.Turn off 1 small rad at both ends and drain.Fill this rad with the inhibitor,turn valves on again ,top up system and run it for however long the inhibitor maker says.Then empty system and remember to fill and empty 2 or 3 times.
Do this before putting the new TRVs on.

Gasman
August 2008

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for System Heat Combi

Free repair help for Worcester oil filled radiators

worcester danesmoor 20/25, lockout/repriming tigerloop and pump?

Camray 5 'lockout'?

how do I remove the burner from my Worcester Bosch 15/19 - ?

Worcester heatslave 20/25?

Where is the reset button?

worcester heatslave 20/25 central heating but no hot water?

How to switch off lock out light?

Where can I get parts for a Worcester Heatslave boiler?

whats wrong with my Worcester Danesmoor 12/14?

hot water but no heating?

how many rads can a worcs danesmoor 20/25 run ?

How to put gas boiler on again after non use? Worcester Junior model?

Mend Worcester Oil Filled Radiators

Related Categories

Mend > Oil Filled Radiators

Flushing unvented CH system?

Automatic Answer

Flushing unvented CH system?

I can answer this question ...

Flushing unvented CH system?

How to mend ...

Mend oil filled radiators ...

Daewoo hea1130 model 7 fin?

Firebird Combi?

Efficiency of my oil heater?

What size spanner to free rad bleed valve?

Comfort zone?