Remove clutch drum assyembly?

was looking for Troy-bilt answer to this question and found this,,,

http://troybilt.custhelp.com/cgi-bin/troybilt.cfg/php/enduser/std_adp.php?p_faqid=390&p_created=1043176904&p_sid=7S_aENej&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NDEsNDEmcF9wcm9kcz0wJnBfY2F0cz0wJnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1jbHV0Y2ggZHJ1bSBhc3NlbWJseQ**&p_li=&p_topview=1

BrianC
September 2008

It takes a special Torx T20 screw driver and you will have to grind down the shaft of the screw driver to fit down in the clutch drum shaft hole. It is right hand tread and same driver should fit all the torx screws. Good Luck!

Roger Haslip
August 2008