Qualcast Quadtrak 30 Loss of power - Belt replacement?

My mower is making a strange noise but blade is not moving any ideas ?

Lorna wilson
April 2017

I forgot to mention in my previous reply: After removing the lower housing and taking out the broken belt loosen the two large cross-cut screws. This will enable the toothed pinion to be moved so that the belt can be positioned in place. The belt can then be tensioned by hand and the screws tightened.

Gerald Curling, Bristol
November 2011

This can be done by working underneath the unit - don't remove anything on top like I've just done. I think you can change the belt by first of all removing the blade and then the three screws which secure the bottom half of the belt housing (not the two big ones). These screws could be difficult to find if the bottom of your mower is like mine and is covered with earth etc. Remove the bottom half of the belt housing. You will now have access to the belt.

Gerald Curling
October 2011

I thought that if the blades were turning then the belt was ok.

liz riley
July 2011