The 'water full' light on our tumble dryer, white knight 76aw, will not go out, therefore the machine wont work. Ive emptied the bottle, dried the inside, turned the power off etc but the light wont go out.
Any help is appreciated.
thank you
there is a micro switch in a black plastic holder mounted to the back frame inside where the bottle goes.these distort and cause the problem your having.take the top of by removing 3 screws from the rear and you will see the switch and plastic holder behind draw support.any distortion on the black plastic will cause this fault.should be staight and 90 deg corners .not bowed in the middle.
ck
November 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
