my zanussi ZT 455 does not fill with water What's wrong?
I suspect either the water inlet pipe is blocked or the controller is malfunctioning. The machine runs and the element warms up, completes everything as normal and signals end of wash. There is a burning smell from the element. The dishes are dry. How do I check to find the faulty part? Is it easily accessible?
take filter out and you will see a dome bit with a screw in the centre.remove screw.remove the tubes by pulling them out 1 by 1 and washing them out with HOT water.underneath the dishwasher is some thin hoses (3).remove one end and blow down them incase they are blocked with grease
ck
December 2008
Automatic Answer
We may have found other answers which could help you.