You will need a deep 10mm socket or 10mm spanner. Adjustment is done by tightening the nut at the top of the clutch pedal (runs down a thread on the cable) adjust until the clutch pedal is about 1/2 inch above the brake pedal. If this doesn't work you may need a new clutch. If anywhere near Glasgow- clutch kit supplied and fitted £220.00 take just over an hour
mndsc5@hotmail.com
December 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
