INDESIT WI 101, PROGRAMME KNOB ROTATES CONTINUALLY?

http://www.4indesit.co.uk/cgi-bin/product.pl?PID=177687&query=Indesit%20WI101UK&model=WI101UK&path=52691

this link to the brush replacement of WI101 machine.

Pete
January 2009

my washing machine is the same model and is doing exactly the same thing but mines is flashing 8 times between pauses

Heather
January 2009

Indicates a motor or drive problem.
Check out the carbon brushes in the motor. Theyre graphite blocks which transfer mains power to the copper segments of the motor -Theyre probably worn down. They're quite cheap parts and easy to replace. Power off, drag machine out onto the floor, remove the back cover and locate the motor. May help if the machine is tilted at an angle or laid on its side. The brushes are at the other end of the motor from the drive pulley. The holders are plastic or bakelite and are generally held in with screws or plastic clips. Also, look at the copper segments they run on to check for burning or pitting. If the segments are burnt or damaged you need a replacement motor or a replacement armature (motor part) if you can source one. Occasionally may be a fault in the motor drive circuit board - in which case replacement of board only real option.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy
December 2008

Additionally I should have said the light flashes twice between pauses. What does fault code indicate?

Bill
December 2008