Sony KDF-50E2010 PICTURE PROBLEM?

Don't have a middle top button so which one is the analogue

king
April 2013

does nobody listen on here? he has the same problem i have our remote has analogue button on the left in the middle not the top.. we need a fix for the rm ed007 remote

sean
February 2011

HI, I'm struggling to get rid of the ghosting, i have tried to do the fix as per below instructions but the analog button on my remote RM-Ed007 is on the left to the middle of the remote and not in the middle at the top, the sequence isnt working???

Jayboy1987
October 2010

worked for me. thanks

jp
October 2010

man your the mac daddy, did that and it did the job. thanks a lot

ryan
July 2010

I just got this TV for free from my mum as she got a new one.. Couldn't wait to get it set up on my Xbox for a bit of 50" HDMI action, very disappointed to see the ghosted image when I booted up. Thanks a lot for your advice, this fixed the problem.. Happy days!!!

Geo
June 2010

yes,it works doing all the above
thankyou

Rob
December 2009

to: davy mac,
Worked for me, cheers, m8!

Patrick
November 2009

This sounds great but i cant bring up service menu plse going into more detail press which buttons in sequence for the sony lcd kdf50e2010 tv thanks bring up the service menu.
im at my wilts end with this.........plse help if you can

razji
October 2009

I had also this problem, but this fixed it!
Thank you so much! :P

Gaute
June 2009

Hi Mate. Had EXACTLY the same problem with the same tv. Go into the settings on the ps3 and change the resolution i think u need to set it to 1080 ..!!! (even though the tv is only 780) not sure y but it solved the problem for me

Steve
May 2009

Well this is the fix for the usual Ghosting problem....

To bring up the "service" menu, put the TV in standby mode, then press in sequence :

Onscreen Display ( the little screen with the i+ in it )
5 ( channel number 5 )
Volume Up ( upper end of volume button )
Analogue ( middle top button )

The TV should switch on and when it's warmed up, you should see a screen with lots of big green lettering on it.

Press the "menu" button ( middle bottom )

Use the direction dial to move down to "LCD Drivers" and press right on the dial to enter this menu.

Move down to "S H Pos Reg R". It should be "10", change it to "11". ( Left/Right to adjust )
Move down to "S H Pos Reg G". It should be "10", change it to "11".
Move down to "SHPos Reg B". It should be "10", change it to "11".

Press the menu bottom to drop out of the menus, and the standy button to drop to standby. Switch back on, and hopefully your ghosting will be gone

davy mac
March 2009