Mend > Vans

Mend Mercedes-Benz Vito 108D Clutch Pushed Floor

bleeding my clutch on mercedes vito 108d?

I pushed my clutch pedal to the floor and it stayed there,i can only pull it back up by hand,i have no clutch at all now.Do i have air in the system and if so how do i bleed it.

steve
February 2009

Mercedes-Benz Mercedes-Benz Vito 108D Vehicles, Vans Clutch Pushed Floor

the 108 d is usually an external cylinder 2 bolts and back bleed to get excess air out/make sure the reservoir is filled lid on and your done/part is £50/labour £40.

antboy
September 2014

Your slave cylinder is probably worn. Remedy by adding correct brake fluid to your brake fluid reservoir and pump the brake pedal a few times. This will afford a quick fix but inevitably will get worse resulting in the need of a replacement slave cylinder.

Danny De Vito
January 2011

the same happened to my vito 108cdi i just had the master cylinder replaced (which is on the clutch pedal £40 from europarts) and u have to bleed it in reverse from the slave cylinder in the gearbox housing

bill
August 2009

gunstone easy bleed, connect to your osf tyre, 30psi, and pressure bleed the system, takes 5min, and saves you calling people like me out ha ha
williamsdiesels.com

Deano
February 2009

Probably your 'concentric' slave cylinder has failed. Gearbox out job m8. Quite costly, cylinder is about £150 or thereabouts + 6-7 hours to have repaired

joe
February 2009