hoover U6425-900 overheats?

should i replace cord or what it gets really warm

willis
December 2009

my hover electrical cord gets really warm is this going to be a fire hazard?

willis
December 2009

If the vac isn't clogged and motor is working properly, then the thermal overload is defective (common problem). The base and agitator housing has to be removed from the machine to remove the motor cover. The thermal overload is located beside the motor in the orange (or black) wire. I usually splice the new part into the existing wiring, because more disassembly would be needed, which is not necessary.

www.vacuumcleanerhelp.com
July 2009