The On/Off switch will no longer stay pressed in (On) so need to replace the switch but how easy is it to do? I looked under the worktop at the rear of the switch assembly and you can't appear to get a screwdriver at it, as the drum is very close, any suggestions?
on/off buttons on these models dont stay in. the power to machine is held by the relay very common fault. easy test hold the on/off button in and keep pressed in if machine starts turning and stops as soon as you release then its the relay pcb
anchorman
July 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
