Is it hard to repair a B & S small engine?

You will need to look at certain items in engine one being the crankshaft ......if its grooved from lack of oil it might be cheaper just to replace the engine ....I had a 3 hp that did the same thing and was going to rebuild it till I found out the crankshaft was $85.00...........but have rebuilt alot that never made a sounds and they looked bad .......

bg
February 2006

That 28N707 had history of a problem with insufficent lubrication to the PTO bearing. If you pull the sump off the bottom and find the bushing is shot you may have to replace the entire sump. Before going that far check the crankshaft where it goes through the bushing to make sure it isn't gouged up.

Rick
February 2006