baxi back boiler system electrics?

Thanks guys, after checking the wiring to the pump again I noticed a switch within the housing. I pushed switch the other way and hey presto pump working, heating working and me cursing for not noticing this earlier.

Thanks again guys

David Hamilton
September 2009

check if there is power going to the pump, if yes check cables are in right, otherwise faulty pump. if no power, then it's a wiring fault.

Ian
September 2009

I will try that tomorrow had enough tonight
will let you know how it goes tomorrow

thanks for your help

david hamilton
September 2009

The pump is not running
I dont have thermostatic radiator valves
there is water in the tank yes,

I switch the heating on and the back boiler ignites to heat the water, the heat transfers through the water to the copper pipes at the pump but the pump does not appear to be working even though it is new.

David hamilton
September 2009

make sure them cables into pump are in properly might look in but sometimes arent

ste
September 2009

Is the Pump actually running ?
Are your Thermostatic Radiator Valves Stuck shut?
Is there water in the F&E Tank
etc etc etc

www.elanar.co.uk
September 2009