hello, i have a ford transit 300. i am having problems selecting gears. the problem is not constant when driving only Intermittent. How ever when the van is stationary i cant get in to any gear unless the van is turned off.
theres 6 bolts /2cables /pipe & plug. the tools you need are:-(long wobly end ext /10mm socket /Houdini good luck
dennis the menace
December 2009
they also have a problem with the bolt that holds the selector together inside a small 8mm or 10mm bolt this comes out and makes it not select gears, try removing the selector and see what i mean we have done loads at ford
johnboy
September 2009
transits have a problem on gear selector shaft siezing,can be removed without taking gearbox out, 4 bolts on top of box
mechanic
September 2009
If you can select the gears when the engine is off, then it sounds like you have a clutch problem, rather than a gear linkage one.
John
September 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
