Hi, I have a belling IDW604.Last week my wife went to unload the dishwasher and it hadn't drained properley.
She tried to drain it but there was no power, then after that it started beeping and the lights were flashing. The only way to stop this was unplug it.
I have drained it and also removed water in the salt dispenser.
There is now no power at all and I have changed the fuse in the plug.
Any ideas?
Darren
No power to my belling IDW 604 dishwasher fixed the error code 4 dishwasher worked for 1 week then stopped now the machine will not start and there is no lights on the program board I have checked the main plug which is fine
Kas
January 2014
Engineer coming out for the third time.problem on this machine is water getting into the PCB and fusing via the power button panel.Design fault, Original fault after two weeks replacement part different to original,made in China could be the problem. Second and third engineer confirmed water getting to the electronics via condensation
Dono
December 2011
what does an e2 error mean please
Peanut
March 2011
From previous call-out, Belling sent a PCB by post.
Engineer used his one, anyway I fitted the new PCB (anmodified one at that) All works, after 3/4 washes I'm now getting E1 code come up and this doesn't seem to be such a common one to find answers too.
Manual suggests faucets not open, any ideas on this one!
Darren Parker
November 2009
Suddenly the power came back on beeping and flashing lights. Whats that all about?
Belling came out last year under warranty and changed the control panel, could that be it and its gone again?
Darren
November 2009
Hi Darren,
Thats weird, I had exactly the same problem happen this evening. My machine is only 1 yrs old, had a problem yesterday with machine freezing, power button would not switch off. Today power will not come on, no lights, nothing.
Adrian
November 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
