Mend > Tumble Dryers

HOTPOINT Washer dryer - not spinning .. making a grumbling noise?

Hey guys
I own a First Edition 1100 machine and it gets to the end of the rinse cycle then stops with water clearly visible in the bottom of the drum - say, about a quarter full.

After the end of that cycle, instead of moving on to the dryer mode, it just sits there ...

Any ideas as to what's wrong with it ?

Thanks in advance

Paul
November 2009

Hotpoint Household Appliances, Tumble Dryers Hotpoint Noise Edition

My Hotpoint washer dyer only proceeds to drying automatically after the wash, if timer is set. The water in the tub may be a rinse hold setting selected automatically on delicate wash programmes ( usually the second half of the dial) which needs to be actioned manually e.g. pressing a button. you can download a handbook for your machine on the Hotpoint website if you have lost your book. www.hotpoint.co.uk. could also be a blockage in your pump preventing the programmer advancing but that would prevent anything happening after wash cycle

Kevin
March 2010

Must be something about November and this model, as I just has the same thing happen this afternoon - basically it wouldn't go into spin cycle and finished the programme with a pool of mucky water in the bottom.

I found that by removing the outlet hose from the waste pipe, I could see water WAS then draining out, and the machine then worked properly again - so maybe the waste pipe was blocked and removing the hose and putting it back in cleared the blockage.

Andy Clarke
November 2009