Mend > Food Processors

Replacement Braun Multipractic spindle?

Unfortunately, whilst the motor on this food processsing machine is still pushing out full power after some 20 years or more, the plastic drive spindle covering has sheared, half-way up - just where the round shaft becomes the driving hexagonal shaft.
I have tried to repair with hardening epoxy material - but am not confident this will work.
It seems that such a replacement part is not now available.
Does anybody have a similar machine which is no good any more but has the spindle intact, please.
Multipractic model number is 4258.
Many thanks for any help available out there!

Colin Bevan
November 2009

Braun Braun 4258 Kitchen Appliances, Food Processors

My aunt's old 4258 has just had the exact same problem - the plastic covering on the spindle has split in the middle and there is a 5-8mm gap which means the lid won't fasten.
Is it possible to replace this part? Doubt it.

xina
July 2016

I fastened a tiny plastic ziptie around the base of the spindle. If it will break, I'll just put a new one. Works good

Mat
February 2011

I have the same exact problem !!! I looked everywhere for the part. I'm going to try epoxy as well.

Steve G
December 2009