Mend Baxi Home Heating Systems

Find out how to mend it for free.

Ask Question

Mend repair fix Baxi home heating systems

Related Categories

Convector Heaters

Fan Heaters

Oil Filled Radiators

Mend > Home Heating Systems

my baxi duo-tec HE24 wont fire up?

My boiler baxi duo tec 24HE wont fire up. It keeps signalling E133 meaning gas supply fault or ignition problem. I have tried resetting it a large number of times today but still getting the same problem.

Ant
December 2009

Baxi Heating, Home Heating Systems Wont Fire Up

my heating wont come on, when it eventually fires up it sounds like a mini explosion upon ignition. been like this for a few days. i've changed the ignition lead, but now it wont fire up at all. show error 133. any clues to problem?

tony beno
March 2013

keeps coming up with E110

steve help please
March 2012

e133 fault code is a bent ignition electrode because of constant heat. either take out and reshape or replace with upgraded electrode. repair done!!!

RICHIE RICH
January 2011

I had this exact problem this morning - turned out the condensate pipe had frozen and become blocked - poured hot water on it (thanks, Kevin) to defrost and sure enough, the boiler restarted. Have just been out to buy some insulation for the outside pipe to ensure this doesn't happen again!

Michael
December 2010

Ant have the exact same problem, keep resetting but nothing. Had an engineer out last year, turns out the flew wasn't installed correctly - water was flowing back into the system. Check your internal flew is at an 15 degree angle upwards and no water is in the elbows of the flew. Hope it helps!

Paul
January 2010

I took of the front panael of my Boiler (Baxi 24 HE) The flames did come up after I reset it but then when of. Then came the Flame Failure LED. Any clue please. The pressure bar indicates its on 1.

scouse
January 2010

I had an E133 error on my Baxi today. It turned out that the condensate pipe had frozen in the cold weather. I poured a kettle full of boiling water over the external horizontal pipe and after a minute or so a load of water came out of the pipe. After resetting the boiler everything was ok.

Kevin
January 2010

check igniter and leads
check for a spark first
if there is no spark it will go off on flame failure

b
December 2009

Thanks for getting back to me! Yes still shows E133 each time its reset. Seems to go through the motions of trying firing up but burner light doesn't come on then goes to E133 mode

ant
December 2009

does it show E110 after resetting it

b
December 2009