Zanussi fridge freezer problem?

Whhops it's come back. I removed the drip funnel and cleaned it, I can not get to anything else above that as the back of the fridgefreezer is sorta welded on making access imposible. I did turn it off for 24 hours.
Can you give me any more advice?

Roy
January 2010

Seems to have done the trick, thankyou so much for your help. Roy

Roy
January 2010

turn off appliance for 24 hrs.pull the appiance out and on top of the compressor is a drip tray.going in to the drip tray is a tube or a grey rubber spout.remove the bit on the end of the tube and blow down it or if its grey rubber spout pull it off CAREFULLY and make sure its clean and squeezes open and shut.refit and test.water must come out here on auto defrost otherwise it backs up and comes inside the base of the freezer

ck
January 2010