Hi I'd also like someone to help me we this question also. I need to replace the belt and have removed the drum. I'd like to know for future repairs on how to remove the fan. I've tried to pull it off as I dont see any bolts holding it on but it's fixed fast. Any help on removing this would be greatly received.
Guy
October 2011
remove all the screws from the back panel,then carefully pull the back out until there is a gap for the belt to go between back panel and drum.fit the belt around drum (will be tight),then tip dryer on its side and remove plate on base (4 screws).find belt and pull it as hard as you can over the motor pulley ( very hard ).reassemble and try.
ck
January 2010
You dont need to!
ck
January 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
