How can I fix my Reebok TR2 Premier Run Treadmill (RE11302)?

I have a Reebok tr2 and the elevation has just gone up by itself and the controls dont work anymore, the running part works but it at full elevation !

Mark Cronin
August 2019

wiring to the moter board and circuit board re100pow.rev f

moklis
January 2019

My Reebok treadmill has been having problems for a while with the control buttons not working. I could use the treadmill using only the up and down arrows for a while. Then all of a sudden it came back to life and was working perfectly until yesterday when I tried to use it. Now none of the function buttons work, and all there are, are zeros. I don't know exactly what the model is.

Joan
February 2017

can smell burning when running on TR2 reebok treadmill

shellym
April 2010

did you use the powerfold after putting the lube on? if so what happens is the lube slips down the underside of the belt and congregates at the bottom. when the treadmill is then powered down you are left with one very slippy patch and the rest of the belt will be jerky. this iss what happened to me a while ago. try wiping all the excess lube off the underside of the belt and just put a very small line of new lube down each side of the treadmill, also wait about two weeks for the lube to dry before using the powerfold , hope this helps.

andy
March 2010