how do i replace my aeg lavatherm 620 tumble dryers drive belt, i have taken off the top and sides and still can not reach to fit it. i cannot remove the front off the machine as there are rivets in it
I have a Lavatherm 35600. The technique already described by R of removing the fan and the back panel looks as if it will work for this too. I have had to order the belt but will post a note when I have fitted it to confirm it was successful.
Rob
April 2010
R reporting, the technique above worked OK
R
February 2010
Undo the clip and slip the fan of the motor shaft. disconnect all applicable elect. connectors. Unscrew the whole rear panel from top and bottom corners. Now feed the belt over the whole rear panel.
Hope this works as this is my plan when the new belt arrives.