Mend > Dishwashers

Mend AEG 4040 Dishwasher Pump Stuck Cycle

HOW TO FIX MY AEG FAVORIT 4040?

the cycle seems to be stuck in one position in that the pump is running but nothing else is working even when manually adjusting the cycle also on/off button not working the only way to stop the pump is to turn off at mains . any ideas?

peter blackpool
April 2006

AEG AEG 4040 Kitchen Appliances, Dishwashers Dishwasher Pump Stuck Cycle

Thanks Paul - followed your recommendation after t'Mrs had stopped the machine mid-cycle and only had pump noise emmitting. Top off, side panel off and found about 1/4 inch of water in the 'sump' - cleared it out and hey-presto - machine and my wallet better for it ;-)

JM

JM
July 2006

sounds as if you have a leak from the dishwasher, there is an anti flood device on the unit, if water leaks from the unit it collects in the plastic trough below the unit, when it gets to a certain height, a float switch cuts in the pump and shuts down the operation of the unit until the water is removed, the only way to stop the pump is to switch off at the mains.
We got an expert to look at the unit, after taking the side off he sponged out the water and identified the leak from the joint between the innercasing of the unit and sealed it.
This lasted a year till it started again, when it was identified as major pump leak and disposed of.

Paul Dancer
April 2006