lever handles on damixa monobloc tap?

I have a tap identical to this one; they're made by damixa. How do you get the handles off? On mine there is no alan-key bolt that can be removed. Also can you get replacement ceramic valves for these, as my cold tap keeps dripping despite it being off.

I would appreciate and help or advice please.

Many thanks all

Michael
November 2011

I have a Sofia Monobloc Tap Chrome Finish; the cold side is dripping slightly so I was wondering how to self repair this problem? Thoughts or advice anyone.

Bought tap from B&Q - see here: http://www.diy.com/diy/jsp/bq/nav.jsp?action=detail&fh_secondid=9996592&fh_view_size=10&fh_start_index=50&fh_location=//catalog01/en_GB&fh_search=taps&fh_eds=%C3%9F&fh_refview=search&ts=1288030285625&isSearch=true

Many thanks

Michael
January 2011

it is fitted right.its just a change in design of tap.

raymy
September 2010

A word of caution, you then need to swap the hot and cold supllies. The guts of the taps are different for hot and cold. The designated 'cold' tap will fail when used with hot water.

Bri
August 2010

I have just had the same problem, so I simply pulled the handles off, undid the valves/cartridge inside, swapped them over, then replaced the handles.

It seemed remarkably easy - possibly too easy - However it seems to have done the trick, although only time will tell !

Phil G
April 2010