Mend Fisher & Paykel GW711 Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Mend repair fix Fisher & Paykel GW711 washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

Mend Fisher & Paykel GW711 Washing Machine Fault Code

Fisher & Paykel GW711 - fault codes?

My GW711 is showing a fault indication across the "Wash Progress" indicators.... third and forth lamp from left as well as spin plus continuous beeping every second. Pressing start/pause changes indication to lid locked. Pressing power reverts to fault code. Power isolation reset doesn't do anything. System pumps down but pumps continues to run after empty....
What is likely fault? Is the indication a fault code?
Any simple resolution beyond calling in a tech?

Stephen
May 2006

Fisher & Paykel Fisher & Paykel GW711 Household Appliances, Washing Machines Washing Machine Fault Code Fisher & Paykel

My fisher and paykel GW711 is showing the 3rd, 4th and last lamp. Can you please let me know what fault code, what is wrong and any way I can fix it?

Lisa
December 2014

Fuccccccckkkkkkk this shit!!!

I'm going to melt this machine and piss on it
May 2014

Fault 49 is 9 times out of 10 the motor control module at fault.

Bill
August 2012

My fisher paykel washing machine model no. gw711 has the last wash cycle and spin lights constantly on with continous beep. Cannot seem to be able to reset. I have turned on and off again with no response. How do I reset this without a service call..

Dane
November 2011

I HATE MY FISHER & PAYKEL!!!! such a pain in the behind to get fixed!!!

Frustrated in Montana
January 2010

fault 49 comes up on my screen

Tony
March 2009

Speaking to Fisher and Paykel the fault number is 49 Circuit Breaker Internal. The faults that could relate to this are that the pipelines are blocked, the hot/cold valves are inoperational or the diverter valve may be either blocked, stuck in the open/closed position or it is inoperational. I am still trying to get some more detail regarding the valves so I can test them. Other than that this is about as far as I have gotten on a Saturday afternoon when there is no technicians working over the weekend. Hope this helps

Timmie
November 2007

Turns out that I have now encountered exactly the same issue described above. Has anyone determined how to resolve this issue?
Thank you

Tim
July 2007

We have the same problem with the lights - how did you fix the problem Stephen?

Carol
April 2007