I'm getting water ok with the above boiler, but no heating - electrics seem to be working fine. I think the pressure is a little low.
Anything a complete novice can do without a pro?
hi, the boiler pressure must be over 1bar ie 1.5 bar is good,the boiler has a low pressure cut off, top up the pressure carefully via the fill up loop pipe/valve.and all should be back to normal.
take care and do not play with the gas [bang]. ok bob rob.
bob rob
May 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
